← All articles
Running a Trade Business

Plumbing Contract: 6 Free Templates to Copy and Use

A plumbing contract names the plumber and the customer, describes the work, sets the price and payment terms, and carries both signatures. Six templates to copy: service call, project, maintenance plan, emergency authorization, change order and completion sign-off.

Josh · Nov 13, 2026 · 12 min read

  • plumbing contract
  • plumbing contract template
  • plumbing service agreement
  • plumbing maintenance agreement
  • plumbing change order
  • plumbing business

A plumbing contract is a written agreement between a plumber and a customer that describes the work, the price, the payment terms and who handles permits, and it carries both signatures. The six templates below cover a service call, a larger project like a repipe or water heater swap, an annual maintenance plan, an emergency authorization, a change order and a completion sign-off. Copy one into a document, replace the brackets with your own details, and check it against your state's rules before you use it.

A clipboard with a printed form and a pen on a granite kitchen counter beside an open sink cabinet with new copper and PEX supply lines

What a plumbing contract has to cover

eForms lists seven parts that belong in a plumbing contract: scope of work, permits, equipment, timeline, payment, insurance and termination. Housecall Pro's template adds changes, delays, damage to equipment and governing law. Between the two, you get the core of every form below.

PartWhat to writeExample line
PartiesYour business name, address, license number, and the customer's name and service address"Service address: 418 Birch Ln, rear unit"
ScopeFixtures, pipe runs and equipment, plus what is not included"Replace 50-gal gas water heater. Drywall repair not included."
PermitsWho pulls the permit and who pays the fee"Contractor pulls permit; fee billed at cost"
ScheduleStart date, expected finish, and what moves the dates"Start Dec 2, finish in 2 working days"
Price and paymentTotal or rate, deposit, due dates, accepted methods"Balance due on completion, check or card"
ChangesHow added work gets priced and approved"No extra work without a signed change order"
WarrantyLabor coverage and how manufacturer warranties pass through"Labor warranted [number] months"
SignaturesBoth parties, with dates"Signed and dated by both"

Write the scope the way you would explain it to a new apprentice. "Fix the leak" invites a dispute. "Replace the 1/2-inch copper supply to the kitchen faucet from the stop valve to the faucet tail" does not.

State rules to check before you send it

Contract rules for plumbing work come from your state, and some apply to every home improvement trade. Three examples show how much they vary.

In California, the Contractors State License Board says a written contract is required for all home improvement projects over $500. The contract needs a detailed payment schedule, a completion date and written direction on who gets the permits. Any change to price or scope must be a written change order signed before the change. The down payment cannot be more than $1,000 or 10 percent of the contract price, whichever is less.

In Texas, the State Board of Plumbing Examiners tells consumers that the written estimate and invoice should carry the Responsible Master Plumber's license number. They should also carry the board's name, address and phone number. Put the same details on your contract so every document matches.

The FTC's Cooling-Off Rule covers sales of $25 or more made at the buyer's home, including when the customer invites you over. The buyer can cancel until midnight of the third business day after the sale. The seller must hand over a dated contract and two copies of a cancellation notice. The rule has an exception for a bona fide emergency the buyer initiated. It applies only when the buyer gives you a separate, dated statement in their own handwriting that describes the emergency and waives the right to cancel.

Check your own state's licensing board before you rely on any template. If you work in more than one state, keep a version of each form for each one.

Template 1: Service call agreement

Use this for a single visit: a clogged main, a running toilet, a leaking shutoff. It is short enough to sign on a tablet at the door.

PLUMBING SERVICE CALL AGREEMENT

Date: [date]
Plumber: [company name], [address], [phone], [email]
License no.: [number]
Customer: [name], [service address], [phone], [email]

1. PROBLEM REPORTED
[Customer's description, e.g., "water under kitchen sink, slow drain"]

2. WORK AUTHORIZED
Diagnose the problem and complete the repair described below.
[e.g., "Replace P-trap and slip nuts under kitchen sink"]
Work beyond this description needs the customer's approval first.

3. PRICE
Service call / trip fee: $[amount], [credited to the repair / not credited]
Labor: [flat price $[amount] / $[rate] per hour, billed in [15]-minute
increments after the first hour]
Parts: [itemized on the invoice at listed price]

4. PAYMENT
Due on completion. Accepted: [cash, check, card, other].
Late payments: [your policy, if any, and only as allowed in your state]

5. ACCESS AND CONDITIONS
Customer will clear the work area and confirm the location of the main
shutoff. The plumber is not responsible for pre-existing damage to old,
corroded or brittle pipes, valves or fixtures that fail when handled.

6. WARRANTY
Labor on this repair is warranted for [number] days.
Parts carry the manufacturer's warranty.

Signed: ____________________ Plumber     Date: ________
Signed: ____________________ Customer    Date: ________

The pre-existing condition clause matters most in older homes. A 60-year-old gate valve can snap when you turn it, and the clause tells the customer that before you touch it.

Template 2: Plumbing project contract

Use this for planned work with a larger price: a whole-house repipe, a water heater replacement, a bathroom rough-in, or a sewer line repair. Other forms attach to it.

PLUMBING PROJECT CONTRACT

Date: [date]
Contractor: [company name], [address], [phone], [email]
License no.: [number]   Insurance: [carrier, policy no.], certificate attached
Owner: [name], [property address], [phone], [email]

1. SCOPE OF WORK
[e.g., "Remove existing galvanized supply piping and install PEX-A
supply lines with a manifold to all fixtures listed in Exhibit A.
Install new main shutoff valve."]
Materials: [pipe type and size, fittings, fixtures, brands, model numbers]
Not included: [drywall patching, painting, flooring, fixture upgrades]

2. PERMITS AND INSPECTIONS
[Contractor / Owner] will obtain the permit. Fees are [included / billed
at cost]. Work is scheduled around required inspections.

3. SCHEDULE
Start: [date]. Estimated completion: [number] working days after start.
Water will be shut off during [hours]. Delays caused by inspections,
material shortages or hidden conditions extend these dates.

4. HIDDEN CONDITIONS
If walls, floors or the yard reveal conditions not visible at the estimate,
such as rotted framing, root intrusion or an undersized line, the contractor
will stop that part of the work and notify the owner. Added work is
priced by written change order before it continues.

5. PRICE AND PAYMENT
Contract price: $[total].
Deposit on signing: $[amount] (check your state's deposit limit)
Progress payment: $[amount] when [rough-in passes inspection]
Final payment: $[amount] on completion and final inspection.

6. OWNER RESPONSIBILITIES
Provide access, clear work areas, and a place to park and stage material.
Tell the contractor about pets, alarm systems and finished surfaces nearby.

7. CONTRACTOR RESPONSIBILITIES
Supply labor, tools and materials named above. Protect floors and
finishes in the work area. Remove debris and old materials at completion.

8. WARRANTY
As stated in the completion sign-off (Template 6).

9. CHANGES
Any change to scope, price or schedule must be written and signed by both
parties before the changed work is done.

10. CANCELLATION AND TERMINATION
Owner's right to cancel: [notice required by law, with cancellation form
attached if it applies]. Either party may end this contract for an uncured
breach after [number] days' written notice. Completed work is paid at the
contract rate.

11. DISPUTES
The parties will try to resolve disputes by [discussion, then mediation].
Governing law: [state].

Signed: ____________________ Contractor    Date: ________
Signed: ____________________ Owner         Date: ________

Tie each progress payment to an inspection or a finished stage, not a calendar date. The customer then pays for work they can see has passed.

Five-step diagram of a plumbing job's paperwork: estimate, signed contract, deposit, change order if needed, and sign-off with final payment

How the six templates fit around one job. Diagram only.

Template 3: Annual maintenance agreement

A maintenance agreement is a contract for repeat work over a term, usually a year. Angi describes what homeowners look for in one: an annual inspection, priority scheduling for emergencies and discounted repair rates. Angi also suggests the inspection can include tasks like flushing the water heater and checking water pressure.

PLUMBING MAINTENANCE AGREEMENT

Plumber: [company name], [address], [phone], [license no.]
Customer: [name], [service address], [phone], [email]
Term: [start date] to [end date]. Renews: [automatically for one year
unless either party cancels in writing [number] days before the end date /
only by signed renewal].

1. INCLUDED VISITS
[Number] inspection visit(s) per term, scheduled by the plumber
with [number] days' notice.

2. INCLUDED TASKS
- Inspect visible supply and drain lines for leaks and corrosion
- Flush water heater tank and test the relief valve
- Check water pressure at [location]
- Test toilets, faucets and shutoff valves for leaks
- [Sump pump test / water softener check / other]
Written findings are left with the customer after each visit.

3. MEMBER TERMS
Repair labor discount: [percent] off standard rates.
Service call fee: [waived / reduced to $[amount]] during the term.
Scheduling: [priority booking for urgent calls, subject to availability].

4. NOT INCLUDED
Repairs, parts and replacements found during inspection are quoted
separately and need the customer's approval.

5. PRICE
$[amount] per [year / month], billed [in advance / monthly].

6. CANCELLATION
Either party may cancel with [number] days' written notice.
Refund of unused term: [your policy].

Signed: ____________________ Plumber     Date: ________
Signed: ____________________ Customer    Date: ________

Write "subject to availability" next to any priority promise. If a cold snap brings in twenty frozen-pipe calls in one morning, you cannot be first in line for every member.

Template 4: Emergency service authorization

A burst pipe at 2 a.m. leaves no time for a long contract. This one-page form authorizes immediate work and records the price basis before you start.

EMERGENCY PLUMBING SERVICE AUTHORIZATION

Date and time: [date, time]
Plumber: [company name], [phone], [license no.]
Customer: [name], [service address], [phone]

1. EMERGENCY DESCRIBED BY CUSTOMER
[e.g., "Water spraying from ceiling in hall bath, main shut off"]

2. WORK AUTHORIZED NOW
Stop the leak and make the system safe. [e.g., "Cap or repair
the damaged line so water can be restored."]
Permanent repairs are quoted separately after the emergency is controlled.

3. RATES
After-hours call fee: $[amount]
Labor: $[rate] per hour. Parts at listed price.

4. PAYMENT
Due on completion of the emergency work.

Signed: ____________________ Customer    Date and time: ________
Signed: ____________________ Plumber     Date and time: ________

A signed authorization like this one does not waive a customer's right to cancel under the Cooling-Off Rule. For that, the FTC requires a separate statement the customer writes by hand. If your work regularly falls under the rule, ask an attorney how to handle emergency calls in your state.

Template 5: Change order

Use a change order whenever the scope, price or schedule moves after signing. You open a wall for a valve and find a cracked fitting. The customer asks for a second hose bib while you are there.

CHANGE ORDER NO. [number]

Original contract date: [date]
Contractor: [company name], [license no.]
Owner: [name], [property address]

1. CHANGE DESCRIBED
[e.g., "Replace cracked 3/4-inch copper tee found behind laundry wall."]

2. REASON
[Hidden condition / Owner request / Code requirement]

3. PRICE CHANGE
Added: $[amount]   Credit: $[amount]
Original contract price: $[amount]
Prior change orders: $[amount]
New contract price: $[amount]

4. SCHEDULE CHANGE
[None / Completion moves by [number] working days]

This change order becomes part of the original contract.
No changed work starts until both parties sign.

Signed: ____________________ Contractor    Date: ________
Signed: ____________________ Owner         Date: ________

Number change orders in order and keep a running total on each one. When the final invoice goes out, the customer can trace every dollar back to a signature.

A new tank water heater on a drain pan in a utility room, with copper supply lines, a shutoff valve and an expansion tank mounted above it

Template 6: Completion and warranty sign-off

Use this on the last day. It confirms the work is done, records the warranty, and starts the clock on final payment.

COMPLETION AND WARRANTY SIGN-OFF

Contract date: [date]   Completion date: [date]
Contractor: [company name], [license no.]
Owner: [name], [property address]

1. WORK COMPLETED
All work in the contract dated [date] and change orders [numbers]
is complete. Final inspection: [passed on date / not required].

2. TESTS PERFORMED
[e.g., "Supply lines pressure-tested at [psi] for [minutes], no drop.
All fixtures run, no leaks at connections. Water heater lit and
reached set temperature."]

3. LABOR WARRANTY
The contractor warrants its workmanship for [number] months/years from the
completion date. The warranty covers leaks and failures caused by the
installation. It does not cover damage from freezing, misuse, alterations
by others, or water quality problems.

4. MANUFACTURER WARRANTIES
[Water heater brand, model, serial no.]: [term], registered [by contractor
on date / by owner]. Manuals and warranty papers left with owner.

5. FINAL PAYMENT
Balance due: $[amount], due [on signing / within [number] days].

Owner confirms the work above is complete.

Signed: ____________________ Owner         Date: ________
Signed: ____________________ Contractor    Date: ________

Write down the test you ran and its result. If a joint weeps six months later, you have a record that the system held pressure on the day you left.

How to keep contracts organized

The IRS lists invoices, deposit information and receipt books among the records that support your gross receipts. Your signed contracts and change orders explain those invoices, so store them together by job.

A simple naming habit helps: customer last name, street, and date, such as "Nguyen-418Birch-2026-12-02". Save the signed PDF, the change orders and the sign-off in one folder. When a customer calls about a warranty, you open one folder and see the whole job.

Questions plumbers ask

Is a verbal agreement enough for a plumbing job?

No, not for anything beyond a small repair. Some states require a written contract above a set price, such as California's $500 threshold for home improvement work. A written contract also gives you a record if the customer later disputes the price or the scope.

Should a plumbing contract include the license number?

Yes. California's board says the contract should identify the contractor's license number. Texas tells consumers to look for the Responsible Master Plumber's license number on estimates and invoices. Putting it on the contract keeps your paperwork consistent.

Do I need a separate contract for every job?

Yes for each project, but you can reuse the same templates. A service call agreement covers small repairs, and the project contract covers anything with a deposit or a permit. Change orders and sign-offs attach to whichever one you used.

Can I charge a deposit on a plumbing job?

Usually yes, within your state's limits. California caps the down payment at $1,000 or 10 percent of the contract price, whichever is less. Check your own state before you set a deposit amount.

Do I need a lawyer to review these templates?

It is a good idea before you use them widely. The templates give you a working structure, but clauses on liability, late fees and cancellation depend on state law. One review of your standard forms costs far less than one dispute.

Let customers request a visit online

Most plumbing contracts start with a phone call that you miss while you are under a sink. Kejoola gives a plumbing business a four-page website with Home, Services, Blog and Contact pages and an online booking form. The form asks for a name, email, phone number and a notes box, so a homeowner can describe the leak and request a visit after hours. You read the request when you come up for air, call back, and send the right contract from the list above.

Sources

Related articles

View all